David DAMAND

KUCHARAVY D., DAMAND D., BARTH M. (2023). Technological forecasting using mixed methods approach. International Journal of Production Research, 61 (n° 16) [ABS cat.3, CNRS cat.2, FNEGE cat.2, HCERES cat.A] Impact Factor. 9.02

DAMAND D., LAHRICHI Y., BARTH M. (2023). Parameterization of Demand-Driven Material Requirements Planning: A multi-objective genetic algorithm. International Journal of Production Research, 61 (n° 15) [ABS cat.3, CNRS cat.2, FNEGE cat.2, HCERES cat.A]

LAHRICHI Y., DAMAND D., DEROUSSI L., GRANGEON N., NORRE S. (2023). Investigating two variants of the sequence-dependent robotic assembly line balancing problem by means of a split-based approach. International Journal of Production Research, 61 (n° 7) [ABS cat.3, CNRS cat.2, FNEGE cat.2, HCERES cat.A] Impact Factor. 9.02

DAMAND D., LAHRICHI Y., BARTH M. (2022). A simulation-optimization approach to parameterize Demand-Driven Material Requirements Planning. IFAC, 55 (n° 10)

LAHRICHI Y., DAMAND D., BARTH M. (2022). A first MILP model for the parameterization of Demand-Driven MRP. Computers & Industrial Engineering, 174 (n° 1) [ABS cat.2, CNRS cat.3, FNEGE cat.3, HCERES cat.B] Impact Factor. 7.18

DAMAND D., BARTH M. (2021). Diagnostic 4.0 du système physique de production : modèle de référence d'audit des gammes de production. Revue Française de Gestion Industrielle ?, 35 (n° 1) [CNRS cat.4, FNEGE cat.EM, HCERES cat.C]

CHEHBI GAMOURA S., DERROUICHE R., DAMAND D., BARTH M. (2020). Insights from Big Data Analytics in Supply Chain Management: An All-Inclusive Literature Review Using the SCOR Model. Production Planning and Control, 31 (n° 5) [ABS cat.3, CNRS cat.2, FNEGE cat.2, HCERES cat.A] Impact Factor. 6.84

KUCHARAVY D., DAMAND D., CHEHBI GAMOURA S., BARTH M., MORNAY S. (2020). Entrepôt du futur : le concept de cartographie de contradictions. Logistique & Management, 28 (n° 1) [FNEGE cat.2, HCERES cat.C]

DAMAND D. (2020). Multi-criteria evaluation model: an application of MRP parameterization. International Journal of Applied Mathematics Electronics and Computers, 8 (n° 4) Impact Factor. 1

DAMAND D., DERROUICHE R., BARTH M., CHEHBI GAMOURA S. (2019). Supply Chain Planning: potential generalization of parameterization rules based on a literature review. Supply Chain Forum: An International Journal, 20 (n° 3) [ABS cat.1, CNRS cat.4, FNEGE cat.3, HCERES cat.B] Impact Factor. 1

CHEHBI GAMOURA S., DERROUICHE R., DAMAND D., KUCHARAVY D., BARTH M. (2019). Cross-management of risks in big data-driven industries by the use of fuzzy cognitive maps. Logistique & Management, 28 (n° 2) [FNEGE cat.2, HCERES cat.C]

DAMAND D., DAMAND D., BARTH M. (2016). Graphe de problèmes-solutions de référence pour la conception des activités d'entreposage. Logistique & Management, 25, 121-133 [FNEGE cat.2, HCERES cat.C]

DERROUICHE R., DAMAND D. (2014). Value creation through collaborative supply chain: holistic performance enhancement road map. Production Planning and Control, 25 (n° 11) [ABS cat.3, CNRS cat.2, FNEGE cat.2, HCERES cat.A] Impact Factor. 4

DAMAND D., DERROUICHE R., BARTH M. (2013). Parameterization of the MRP method: automatic identification and extraction of properties. International Journal of Production Research, 51 (n° 18), pp. 5658-5669 [ABS cat.3, CNRS cat.2, FNEGE cat.2, HCERES cat.A]

KUCHARAVY D., DAMAND D., BARTH M., DERROUICHE R. (2018). Collaborative Design of Warehousing 4.0 Using the Concept of Contradictions. Collaborative Networks of Cognitive Systems: 19th IFIP WG 5.5 Working Conference on Virtual Enterprises, PRO-VE 2018, Springer, Cham., Camarinha-Matos L., Afsarmanesh H., Rezgui Y., 396-405

BARTH M., DAMAND D., LEPORI E. (2017). Problem Graph for warehousing. The Theory of Inventive Problem Solving, Current Research and Trends in France, ISBN 978-3-319-56592-7, SPRINGER

DAMAND D. (2013). Benefits and limitations of the SCOR model in warehousing Manufacturing Modelling. Manufacturing Modelling, Management, and Control, Volume# 7 | Part# 1, DOI: 10.3182/20130619-3-RU-3018.00174, International Federation of Automatic Control, pp. 424-429

DAMAND D. (2013). Study of the transferability of properties used for designing production systems layouts to distribution warehouse layout design. Manufacturing Modelling, Management, and Control, Volume# 7 | Part# 1, DOI: 10.3182/20130619-3-RU-3018.00175, International Federation of Automatic Control, pp. 483-488

DAMAND D. (2013). Analysis method of the relations between MRP parameter and performance indicator based on a literature review. Manufacturing Modelling, Management, and Control, Volume# 7 | Part# 1, DOI: 10.3182/20130619-3-RU-3018.00606, International Federation of Automatic Control, pp. 377-382

DAMAND D. (2012). VERS UN OUTIL D'EVALUATION ET DE DIAGNOSTIC DE LA PERFORMANCE EN PLANIFICATION DE LA CHAINE LOGISTIQUE. acte de mosim 2012, en cours

LAHRICHI Y., DAMAND D., BARTH M. A simulation-optimization approach to parameterize Demand-Driven Material Requirements Planning,, 10th IFAC Conference on Manufacturing Modelling, Management and Control,, (IFAC Juin 2022)

LAHRICHI Y., DAMAND D., BARTH M. Paramétrage de la méthode Demand Driven Material Requirements Planning": Une approche par optimisation bi-objectif, 14ième Rencontre de l'AIRL-SCM, Clermont-Ferrand, (AIRL-SCM Association Internationale de Recherche en Logistique et Supply Chain Management Mai 2022)

CHEHBI GAMOURA S., DAMAND D., BARTH M., KORUCA H. Conversational Bots with Reinforcement Learning for Multi-criteria Suppliers Selection Focused on post-COVID-19 Risk: Case of French Automobile Manufacturer, CIGI-Qualita21 - Conférence Internationale Génie Industriel QUALITA, (Mai 2021)

DAMAND D., CHEHBI GAMOURA S., BARTH M. Maturité du système physique de production : modèle de diagnostic 4.0, Conférence Internationale de Génie Industriel, (Mai 2021)

KUCHARAVY D., DAMAND D., CHEHBI GAMOURA S., BARTH M. Supporting Strategic Decision-Making in Manufacturing 4.0 with mix of qualitative and quantitative data analysis, 13ème Conférence Internationale de Modélisation, Optimisation et Simulation (MOSIM'20), ( Novembre 2020)

DAMAND D. Using map of contradiction for decision support within warehouse design process, 9th IFAC Conference on Manufacturing Modelling, Management and Control, August 28-30, 2019, ( Aôut 2019)

KUCHARAVY D., DAMAND D., BARTH M., DERROUICHE R., CHEHBI GAMOURA S. Using map of contradiction for decision support within warehouse design process, 9th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2019, (International Federation of Automatic Control Aôut 2019)

KUCHARAVY D., DAMAND D., BARTH M., DERROUICHE R. Entrepôt du futur : formalisation des caractéristiques clefs, 12e Conférence Internationale de Modélisation, Optimisation et SIMulation - MOSIM'18, (Juin 2018)

BESSOUAT J., DAMAND D., BARTH M., DERROUICHE R. Extraction des activités détaillées d'un entrepôt à partir d'un modèle de référence, 12èmes RIRL, (Association Internationale de Recherche en Logistique et Supply Chain Management Mai 2018)

KUCHARAVY D., DAMAND D., BARTH M., DERROUICHE R., MORNAY S. Entrepôt du Futur : Cartographie de Contradictitons, RIRL2018, ( Mai 2018)

DAMAND D., MORNAY S. Entrepôt du Futur : Cartographie de Contradictions, (12es Rencontres Internationales de la Recherche en Logistique et Supply Chain Management 2018)

DAMAND D. Entrepôt du Futur : Formalisation des Caractéristiques Clefs, (12ème conférence internationale Modélisation, Optimisation et Simulation 2018)

DAMAND D. Collaborative Design of Warehousing 4.0 Using the Concept of Contradictions., (19th IFIP Working Conference on Virtual Enterprises 2018)

CHEHBI GAMOURA S., DERROUICHE R., DAMAND D. Predictive Cross-Management of Disaster Plans in Big Daya Supply Chains: Fuzzy Cognitive Maps Approach, (Academy of Management 2018)

CHEHBI GAMOURA S., DAMAND D. Rôles des Analytiques en Big Data dans la Supply Chain: Analyse Approfondie des Tendances Actuelles et Potentiels à Venir, (Academy of Management 2018)

BESSOUAT J., DAMAND D., BARTH M., MORNAY S. Extraction of detailed warehouse activities from a reference model, 24th International EurOMA Conference, (European Operations Management Association Juillet 2017)

CHEHBI GAMOURA S., DAMAND D. Towards a Collaborative Supply Chain Balanced Scorecard Framework to Analyse Collaborative Value-added, (IEEE International Conference on Industrial Engineering and Engineering Management 2017)

BESSOUAT J., DAMAND D., BARTH M., MORNAY S. Collaborer au sein d'une équipe projet: La chaire d'enseignement et de recherche - Le cas de la chaire FM Logistics, États généraux du management, ( Mai 2016)

LEPORI E., DAMAND D., BARTH M. Benefits and Limitations of the SCOR Model in Warehousing, (7th IFAC Conference on Manufacturing Modelling, Management, and Control, MIM 2013 2013)

LEPORI E., FOURIÉ-HERRSCHER N., DAMAND D., BARTH M. Study of the Transferability of Properties Used for Designing Production Systems Layouts to Distribution Warehouse Layout Design, (7th IFAC Conference on Manufacturing Modelling, Management, and Control, MIM 2013 2013)

DAMAND D. Vers un outil d'évaluation et de diagnostic de la performance en planification de la chane logistique, (MOSIM 2012 9th International Conference on Modeling, Optimization & SIMulation Performance, interoperability and safety for sustainable development Juin 2012)

DAMAND D., BARTH M. Etude de la transférabilité, pour l'aménagement d'entrepôts logistiques, de propriétés utilisées pour l'aménagement des systèmes de production, (GOL 2012 : 1st International Conference IEEE on Logistics Operations Management Octobre 2012)

DAMAND D., LEPORI E., BARTH M. Apports et limites du modèle SCOR en logistique d'entrepôt, (GOL 2012 : 1st International Conference IEEE on Logistics Operations Management Octobre 2012)

DAMAND D., BARTH M. Evaluation de la performance en planification de la production : de la compréhension à l'action, (GOL 2012 : 1st International Conference IEEE on Logistics Operations Management Octobre 2012)

DAMAND D., BARTH M. Aide au paramétrage en planification de la production, (7ième conférence internationale en Conception Production Intégrée Octobre 2011)

DAMAND D. Modèle MRP et Matrice d'influence, (15e Journées STP du GdR MACS Octobre 2011)

BARTH M., DAMAND D., LAHRICHI Y. (forthcoming). Méthode DESISHOP : Audit, diagnostic pour l'implantation d'ateliers de production lean. Barth-Damand Edition